带电阻摇摆试验机

                                      图片仅供参考

一，产品简介(Products Profile)：
        耳机线电阻弯折试验机专门试验插头引出线及电线之耐折强度及电阻变化，电阻超上限或低于下限可以自动停机。本机是将试样固定在夹具上，并加一定荷重，试验时夹具左右摆动，经一定次数后检视其断线率，或至电阻超出设定上下限值时查看其总计摆动次数。本机能自动计数，试样弯折至断线或电阻超限时，并能自动停止操作，可选择超限单组停止或超限整机停止，方便采集分析。 本机符合UL817等有关标准“软线组件和电源软线通用安全要求”的规定及《头戴耳机通用技术标准GB/T14471》线材弯折测试。
        The earphone cable resistance bending test machine is specially designed to test the bending strength and resistance change of the lead wire and wire of the plug. If the resistance exceeds the upper limit or falls below the lower limit, it can be automatically shut down. This machine fixes the sample on the fixture and adds a certain load. During the test, the fixture swings left and right. After a certain number of times, the disconnection rate is checked, or the total number of swings is checked when the resistance exceeds the set upper and lower limits. The machine can automatically count, when the sample is bent to the broken line or the resistance exceeds the limit, and can automatically stop the operation, you can choose to stop the single group overrun or the whole machine overrun, which is convenient for collection and analysis. This machine complies with the provisions of UL817 and other relevant standards "General Safety Requirements for Flexible Cord Components and Power Cords" and the "wire headset general technical standard GB / T14471" wire bending test.

二，技术参数(Technical Specification):
       1、试验工位(Test station)：六组（同时测试）Six groups (Test at the same time)
       2、弯折角度(Bent angle): 0-±90°（刻度表盘加指示针指示，可调）Dial with pointer indicator, adjustable
       3、弯折角度显示及调节：指示针指示刻度表盘，可调节偏心轴 Bent angle displays&adjusts: Pointer indicates dial,which adjusts eccentric shaft.
       4、试验速度：10-60次/分（旋钮调速，LCD数字显示） Test Speed：10-60 times/mins (Knob speed,LCD disgital display)
       5、摇摆次数总计数器：0-999999次（可预置，达到次数自动停止，断电记忆功能） Swing times total table: 0-999999 times(Can be preset, automatically stop when reaching certain times, power off memory function)
       6、摇摆导通计数器：0-999999次（导通分别自动计数，其中一组断开，对应组自动停止计数） Swing conduction counter: 0-999999 times( Count apart automatically, one group is disconnected, the corresponding group automatically stops counting)
       7、电阻测量范围0-99.99欧姆（六组分别测量，可设置上下限停止计数/停机） Resistance measuring range 0-99.99Ω (Six groups measure separately,Can set upper/Lower limit to stop counting/Shut down)
       8、停机方式：电阻超限停机，可切换单根超限停机及6组超限停机 Stop mode: If Resistance overruns shutdown, it can switch single root overrun and 6 groups overrun.
       9、带钩砝码：50、100、200、300、500g各六个 Hook weight: 50、100、200、300、500g Each 6pcs
      10、手柄试验夹具：六组防滑、不易损坏试料特制夹具 Handle test fixture: Six sets -- special jigs for anti-skid and not easily damaged samples
       11、试验固定杆：可上下调整，固定产品下端，试验更符合标准 Test fixed rod: Can adjust up and down,Fix low end of product, test can be more standards compliant.
       12、机台尺寸（L×W×H）：850×600×750mm Machine size(L*W*H): 850*600*750mm
       13、机台重量：70kg Machine weight: 70kg
       14、工作电源：AC220V 、50HZ Working power: AC220V、50HZ

三，产品特点(Product Features)：
       1、本机箱体采用静电烤漆处理，根据各类标准进行设计，整机设计合理，结构紧固，运行安全、稳定、准确； The cabinet body is dealed with electrostatic baking paint and designed according to various standards. The whole machine is designed reasonably, the structure is tight, and the operation is safe, stable and accurate;
       2、试验次数计数器可预置，试验导通数器自动计数，达到次数，机器自动停止，具有断电记忆功能，方便实用； The test counters can be preset, the test conduction counter automatically counts, the number of times reached, the machine automatically stops,power off memory function,Convenient and practical.
       3、试验速度旋钮可调，LCD显示，客户根据自己要求设定，人性化设计； Test speed is adjustable knob, LCD display,Customers set as they requires,humanized design.
       4、弯折角度手动可调，指示针指示刻度表盘，能够更好的调节； Bend angle can be adjusted with hand,Pointer indicates dial and adjusts more better.
       5、六组工位同时工作，互不影响，分别计数，其中一组断线，对应计数器停止计数，机器照常试验，提高测试效率； Six groups station works at the same time,Do not affect each other, count separately, one group is broken, the corresponding counter stops counting, the machine is tested as usual, and the test efficiency is improved;
       6、六组防滑、不易损坏试料特制手柄具，夹持产品更方便、快捷； Six sets-- special handles with anti-skid, not easy to damage the sample, clamping products more convenient and fast;
       7、试验固定杆可上下调整，根据标准要求制作，试验效果更佳； The test fixed rod can be adjusted up and down, Be made according to the requirements, the test effect is better;
       8、配置带钩荷重砝码，可多个叠加，悬挂更为方便。 Equipped with hook load weight, which can be superimposed for more convenient suspension.